L1313 Work Light

For more information, see this article's corresponding Wikipedia page: Device.

This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.

L1313

Preliminary Information
Release Year	2000
Leak Risk	Medium
Batteries	Li-Ion
Mounting Technology	Through Hole, SMD, BGA, Sockets
Capacitor Types	Aluminum Electrolytic, Tantalum, Ceramic, Polymer
Destructive Entry	No

The CCI/Woods L1313 is a rechargeable work light with an adjustable angle.

Disassembly Notes

1. Take out the 5 screws on the sides and top holding the front bezel on
2. Take the front bezel, front glass panel and rubber seal off
3. Pull the reflector out to reveal the PCBs

Original Parts

Basic PCB Name

Note model numbers and board revisions here

Capacitor Specifications and Footprint Information

RefDes	Qty	Capacitance	Voltage	Mount	Diameter/Size	Height	Lead Spacing	Temp	Type	Brand	Series
C1, C2, C3, C6	4	220 µF	25V	Through Hole Radial	6.3mm	11mm	2.5mm	105°C	Aluminum Electrolytic	JWCO	LF

Replacement Parts

Basic PCB Name

Capacitors

RefDes	Qty	Compatible Part Number	Order Links
C1, C2, C3, C6	4	25YXJ220M6.3X11	Digikey LCSC

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Kits

• Digikey BOM: https://www.digikey.com/

Related Links

• Videos or other things that might be helpful to check out