Corsair CX500: Difference between revisions

Corsair CX500
Preliminary Information
Release Year	~2013
Leak Risk	Low
Mounting Technology	Through Hole, SMD
Capacitor Types	Aluminum Electrolytic, Ceramic
Destructive Entry	No

VisualWikitext

Latest revision as of 20:28, 1 July 2023

This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables

This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables

The Corsair CX500 is one of the budget model PSU's. It's very similar to the CX450 and CX600 and its modular counterpart CX500M.

This PSU used CapXon brand capacitors, so they might fail quicker than usual.

Known Issues

Cause

After several years of use, the computer will sometimes not turn on. In-particular the the 'Power Good' signal will not work even though it's outputting all the voltage rails correctly.

Solution

Change/Modify a single resistor. This is not a capacitor issue

Original Parts

Located on the back of the PCB, near the middle.

Resistors
RefDes	Qty	Resistance	Mount	Size	Brand
R45	1	22K	SMD	0805	Unknown

Replacement Parts

Resistor
RefDes	Qty	Replacement Part Type	Compatible Part Number	Distributor Links [ Preferred / Search ]
RefDes	Qty	Replacement Part Type	Compatible Part Number	Digikey		Mouser		Farnell		RS Components	LCSC
R45	1	15kΩ 0805 (2012 Metric) SMD Resistor	RE0805FRE0715KL / RC0805FR-1315KL / RL0805FR-7W0R33L / RC0805FR-0715KL / FRC0805J153 TS	Part	🔎	Part	🔎	Part	🔎	Part	Part

Generally speaking you do not need to buy a resistor. Most SMD's can be obtained from an old circuit board. If you can not find a 15K you can use a slightly higher value.

Alternatively you can parallel up a resistor on top of the existing resistor. E.G use a value from 47K to 100K and solder it directly on top. Providing Pin 1 of the power monitoring IC is about 2.5v. (as long as it is above the 1.3v it currently is)

Related Media

Video Repairing the PSU

Additional Images

Open Lid
PCB Bottom
Partial schematic around the Monitor Chip

References

PS229 Power Monitor IC

@@ Line 9: / Line 9: @@
 |Destructive Entry = No
 }}
+The Corsair CX500 is one of the budget model PSU's. It's very similar to the CX450 and CX600 and its modular counterpart CX500M.
-The Corsair CX500 is one of the budget model PSU's.  It's very similar to the CX450 and CX600 and its modular counterpart CX500M.
 This PSU used CapXon brand capacitors, so they might fail quicker than usual.
 ==Known Issues==
 ====Cause====
-After several years of use, the computer will sometimes not turn on.  In-particular the the 'Power Good' signal will not work even though it's outputting all the voltage rails correctly.
+After several years of use, the computer will sometimes not turn on. In-particular the the 'Power Good' signal will not work even though it's outputting all the voltage rails correctly.
 ====Solution====
+*Change/Modify a single resistor. This is <u>not</u> a capacitor issue
-*Change/Modify a single resistor.  This is <u>not</u> a capacitor issue
 ==Original Parts==
 Located on the back of the PCB, near the middle.
 {| class="wikitable sortable"
+|+Resistors
 !RefDes
 !Qty
-!Capacitance
+!Resistance
 !Mount
 !Size
@@ Line 43: / Line 38: @@
 |Unknown
 |}
 ==Replacement Parts==
 {| class="wikitable"
 |+Resistor
 ! rowspan="2" |RefDes
 ! rowspan="2" |Qty
+! rowspan="2" |Replacement Part Type
 ! rowspan="2" |Compatible Part Number
-! colspan="6" |Distributor Links
+! colspan="8" |Distributor Links
 [ Preferred / Search ]
 |-
@@ Line 57: / Line 51: @@
 ! colspan="2" |Mouser
 ! colspan="2" |Farnell
+!RS Components
+!LCSC
 |-
 |R45
 |1
-|15K
+|15kΩ 0805 (2012 Metric) SMD Resistor
+|RE0805FRE0715KL / RC0805FR-1315KL / RL0805FR-7W0R33L / RC0805FR-0715KL / FRC0805J153 TS
 |[https://www.digikey.co.uk/en/products/detail/yageo/RE0805FRE0715KL/5923506 Part]
 |[https://www.digikey.com/ 🔎]
@@ Line 67: / Line 64: @@
 |[https://cpc.farnell.com/yageo-phycomp/rl0805fr-7w0r33l/resistor-0805-1-0-33r/dp/RE05964?st=resistor Part]
 |[https://uk.farnell.com 🔎]
+|[https://uk.rs-online.com/web/p/surface-mount-resistors/1995658?gb=b Part]
+|[https://www.lcsc.com/product-detail/Chip-Resistor-Surface-Mount_FOJAN-FRC0805J153-TS_C2933528.html Part]
 |}
-Generally speaking you do not need to buy a resistor.  Most SMD's can be obtained from an old circuit board.  If you can not find a 15K you can use a slightly higher value.
+Generally speaking you do not need to buy a resistor. Most SMD's can be obtained from an old circuit board. If you can not find a 15K you can use a slightly higher value.
-Alternatively you can parallel up a resistor on top of the existing resistor.  E.G use a value from 47K to 100K and solder it directly on top.  Providing Pin 1 of the power monitoring IC is about 2.5v.   (as long as it is above the 1.3v it currently is)
+Alternatively you can parallel up a resistor on top of the existing resistor. E.G use a value from 47K to 100K and solder it directly on top. Providing Pin 1 of the power monitoring IC is about 2.5v. (as long as it is above the 1.3v it currently is)
 ==Related Media==
 *[https://www.youtube.com/watch?v=4X3nBE0Ys8E Video Repairing the PSU]
 ==Additional Images==
@@ Line 81: / Line 78: @@
 File:IC-PS229.png|Partial schematic around the Monitor Chip
 </gallery>
 ==References==
 [https://pdf1.alldatasheet.com/datasheet-pdf/view/825483/SITI/PS229.html PS229 Power Monitor IC]
@@ Line 88: / Line 84: @@
 [[Category:WorkNeeded:ReplacementParts]]
 {{DEFAULTSORT:Corsair_CX500 }}
+[[Category:WorkNeeded:OriginalParts]]