IBM WDI-325Q 20MB Hard Drive: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 138: | Line 138: | ||
== References == | == References == | ||
<references /> | <references /> | ||
[[Category:IBM]] | |||
[[Category:Computer Part]] |
Latest revision as of 18:34, 27 November 2024
This is a circa 1987-1988 proprietary Hard Drive, manufactured by IBM Japan. Most often found in the IBM PS/2 Model 25 and 30.
"The PS/2 Model 25, 25-286, 30, and 30-286 used an 8-bit pseudo-IDE hard drive interface at 3:1 interleave. Both power and data I/O are provided to the drive through a single card-edge connector."[1]
- For more information, see this article's corresponding Wikipedia page: Device.
Preliminary Information | |
---|---|
Leak Risk | High |
Batteries | None |
Destructive Entry | No |
Known Issues
Symptom or Problem Encountered
Causes
Solutions
Disassembly Notes
Four Phillips screws.
Original Parts
Controller Board – 6127880 – A07188
RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series | Notes |
---|---|---|---|---|---|---|---|---|---|---|---|---|
C2, C9 | 2 | 47 µF | 16 | Through Hole | 6mm | 6mm | 5mm | 105 °C | Electrolytic | |||
C3, C4, C5, C6, C12 | 5 | 6.8 µF | 16 | Through Hole | 4mm | 6mm | 5mm | 105 °C | Electrolytic | C3 is unmarked | ||
C7, C10, C11, C13 | 4 | 10 µF | 16 | Through Hole | 4mm | 6mm | 5mm | 105 °C | Electrolytic | |||
C8, C14 | 2 | 4.7 µF | 16 | Through Hole | 4mm | 6mm | 5mm | 105 °C | Electrolytic | |||
C1 | 1 | 100 µF | 6.3 | Through Hole | 6mm | 6mm | 5mm | 105 °C | Electrolytic |
Replacement Parts
Basic PCB Name
RefDes | Qty | Compatible Part Number | Order Links |
---|---|---|---|
Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.