Xbox One X Power Supply: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
VisualWikitext
(Added symptoms in known issues. Moved youtube videos to references. Changed URL to link to replacement cap)
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This page is for the [[wikipedia:Xbox_One#Xbox_One_X|Xbox One X]] Power Supply (1787).{{InfoboxDevice
This page is for the [[wikipedia:Xbox_One#Xbox_One_X|Xbox One X]] (1787) Power Supply made by [https://power.liteon.com/ LITEON].{{InfoboxDevice
|Title =Xbox One X Power Supply  
|Title =Xbox One X Power Supply  
|Picture =  
|Picture =Xbox One X LITEON PSU Overview JPG.jpg
|Release Year =November 7, 2017  
|Release Year =November 7, 2017  
|Mounting Technology =Through Hole, SMD  
|Mounting Technology =Through Hole, SMD  
Line 9: Line 9:
200-240V ~ 1.3A  50/60Hz|Current=20.42A @ 12V}}
200-240V ~ 1.3A  50/60Hz|Current=20.42A @ 12V}}


(Pictures to be added at a later date)
 
 
This power supply is prone to failure due to little to no ventilation. So the capacitor cooks and vastly reduces its life span. However its worth replacing the single 420v 150µF cap providing the console powers on for a second. Or is making the buzzing noise. No power indicates a do-able, but more involved repair where supposedly you need to source a 4 pin diode package that is somewhat hard to get. Among other parts to replace. Noted in [[Xbox One X Power Supply#Solutions|Solutions]].
 
There is another version of the power supply. However the main control chip is directly under the 420v capacitor. Others have deemed them not worth repairing. I do not have access to one.


== Known Issues ==
== Known Issues ==
Line 24: Line 28:
====Solutions====
====Solutions====
*Replace the 420v 150uF capacitor.
*Replace the 420v 150uF capacitor.
*If the PSU is completely dead. The repair might be more extensive. See "QS Tech" video in [[Xbox One X Power Supply#References|References]].


== Disassembly Notes ==
== Disassembly Notes ==


Pry at the sides of the plastic housing. Lifting to free the tabs holding it together.
Pry at the sides of the plastic housing. Lifting to free the tabs holding it together. The tabs positions are indicated by the holes on the side of the plastic housing. See [[Xbox One X Power Supply#/media/File:Xbox One X LITEON PSU Clip Holes JPG.jpg|Figure A]].


To remove the circuit board. You will need to remove some of the white Silastic glue in the corner opposite where the cable comes out. As well as near the capacitor itself.
To remove the circuit board. You will need to remove some of the white Silastic glue in the corner opposite where the cable comes out. As well as near the capacitor itself. See [[Xbox One X Power Supply#/media/File:Xbox One X LITEON PSU Glue JPG.jpg|Figure C]].


You will need to remove the bottom plate covering the PCB. There are tabs on both the front and back you need to flow to remove the plate. Be aware of the thermal pads between the plate and PCB.
You will need to remove the bottom plate covering the PCB. There are tabs on both the front and back you need to flow to remove the plate. Be aware of the thermal pads between the plate and PCB.
You could cut the leads to the capacitor and avoid removing the bottom plate if you wanted to save time. Not ideal though.
<gallery>
File:Xbox One X LITEON PSU Clip Holes JPG.jpg|Figure A
File:Xbox One X LITEON PSU Hidden clip JPG.jpg|Figure B
File:Xbox One X LITEON PSU Glue JPG.jpg|Figure C
</gallery>


== Original Parts ==
== Original Parts ==
Line 62: Line 75:
|Electrolytic
|Electrolytic
|Taicon
|Taicon
|1732(M)
|AM
|-
|
|
|2200 µF
|16 V
|Through Hole Radial
|
|
|
|
|Polymer
|
|
|}
|}


Line 77: Line 103:
|C150
|C150
|1
|1
|420LXW150MEFR18X35
|420LXW150MEFR18X35 / EKWB421ELL151MMN3S / 450LXW150MEFR18X35
|[https://www.digikey.com/en/products/detail/rubycon/420LXW150MEFR18X35/15667981 Digikey]
|[https://www.digikey.com/en/products/detail/rubycon/420LXW150MEFR18X35/15667981 Digikey] [https://www.mouser.com/ProductDetail/Chemi-Con/EKWB421ELL151MMN3S?qs=GBLSl2AkirvZjV%2F05X095A%3D%3D Mouser] [https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-Leaded_Rubycon-450LXW150MEFR18X35_C1582253.html LCSC]
|}
|}
You can purchase a used power supply from iFixit [https://www.ifixit.com/products/xbox-one-x-power-supply here] if you wanted to outright replace the power supply.
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''


Line 85: Line 113:


[[wikipedia:Xbox_One#Xbox_One_X|Xbox One X Wikipedia]]
[[wikipedia:Xbox_One#Xbox_One_X|Xbox One X Wikipedia]]
[https://www.ifixit.com/Device/Xbox_One_X iFixit repair guides]
== References ==
== References ==
<references />Here are multiple videos showing the capacitor being replaced.
<references />Here are multiple videos showing the capacitor being replaced.
Line 91: Line 121:


[https://youtu.be/U7baMLv-iKo?si=hGsvvTaEcWL38lmO TheCod3r (This Xbox One X Makes A Weird Noise When It's Plugged In! Can I Fix It?)]
[https://youtu.be/U7baMLv-iKo?si=hGsvvTaEcWL38lmO TheCod3r (This Xbox One X Makes A Weird Noise When It's Plugged In! Can I Fix It?)]
Here is a video showing the buzzing noise the power supply makes. Also the console in the state of turning on and then off.
[https://youtu.be/GYVXmHQFgIM?si=fsLhCIc3fqiQOFUt KeleStraza Repairs Electronics (Can I Fix My Broken Xbox One X Power issues?)]
Disassembly Video
[https://youtu.be/IMB0dRU6ZiU?si=c72AEHLL4JKOHbLV MrMario2011 (Xbox One X - Teardown, Repaste, & Reassembly Guide)]
[[Category:WorkNeeded:OriginalParts]]
[[Category:WorkNeeded:ReplacementParts]]

Latest revision as of 02:37, 16 November 2024

This page is for the Xbox One X (1787) Power Supply made by LITEON.

Xbox One X Power Supply
Preliminary Information
Release Year November 7, 2017
Mounting Technology Through Hole, SMD
Capacitor Types Aluminum Electrolytic, Ceramic
Destructive Entry No
Power Requirements
Input Voltage 100-127V ~ 2.75A 50/60Hz . . . . . . . 200-240V ~ 1.3A 50/60Hz
Current (Amps) 20.42A @ 12V


This power supply is prone to failure due to little to no ventilation. So the capacitor cooks and vastly reduces its life span. However its worth replacing the single 420v 150µF cap providing the console powers on for a second. Or is making the buzzing noise. No power indicates a do-able, but more involved repair where supposedly you need to source a 4 pin diode package that is somewhat hard to get. Among other parts to replace. Noted in Solutions.

There is another version of the power supply. However the main control chip is directly under the 420v capacitor. Others have deemed them not worth repairing. I do not have access to one.

Known Issues

Capacitor Failure

Symptoms

  • The console will produce a buzzing noise.
  • The console will not power on or powers on for 5 seconds, then powers off.

Causes

  • Poor heat dissipation causes the cap to fail.

Solutions

  • Replace the 420v 150uF capacitor.
  • If the PSU is completely dead. The repair might be more extensive. See "QS Tech" video in References.

Disassembly Notes

Pry at the sides of the plastic housing. Lifting to free the tabs holding it together. The tabs positions are indicated by the holes on the side of the plastic housing. See Figure A.

To remove the circuit board. You will need to remove some of the white Silastic glue in the corner opposite where the cable comes out. As well as near the capacitor itself. See Figure C.

You will need to remove the bottom plate covering the PCB. There are tabs on both the front and back you need to flow to remove the plate. Be aware of the thermal pads between the plate and PCB.

You could cut the leads to the capacitor and avoid removing the bottom plate if you wanted to save time. Not ideal though.

  • Figure A

    Figure A

  • Figure B

    Figure B

  • Figure C

    Figure C

Original Parts

Power Supply

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
C150 1 150 µF 420 V Through Hole Radial 18 mm 37 mm 7 mm 105 °C Electrolytic Taicon AM
2200 µF 16 V Through Hole Radial Polymer

Replacement Parts

Power Supply

Capacitors
RefDes Qty Compatible Part Number Order Links
C150 1 420LXW150MEFR18X35 / EKWB421ELL151MMN3S / 450LXW150MEFR18X35 Digikey Mouser LCSC

You can purchase a used power supply from iFixit here if you wanted to outright replace the power supply.

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Related Links

Xbox One X Wikipedia

iFixit repair guides

References

Here are multiple videos showing the capacitor being replaced.

Qs Tech Service (Xbox Series X Defect Power Supply Rebuild)

TheCod3r (This Xbox One X Makes A Weird Noise When It's Plugged In! Can I Fix It?)


Here is a video showing the buzzing noise the power supply makes. Also the console in the state of turning on and then off.

KeleStraza Repairs Electronics (Can I Fix My Broken Xbox One X Power issues?)


Disassembly Video

MrMario2011 (Xbox One X - Teardown, Repaste, & Reassembly Guide)

Retrieved from "https://caps.wiki/index.php?title=Xbox_One_X_Power_Supply&oldid=5470"